Belt Width:
Belt Length:
Distance from Charge End to End of Hot Zone:
Distance from Center to Center of Drums:
Drive Location
Method of Belt Support:
Dia of Drive Drum: (maximum allowed)
Dia of Tail Drum (maximum allowed)
Spacing of Support Rollers:
Dia of Rollers:
Load (lbs per Sq. Ft).
Belt Speed (feet per Minute)
Maximum Temperature
(specify Celcius or Farenheit):
Product being conveyed:
Product Size: 
If the belt will be on an incline (please specify degree of Incline):
Is the Load:
Company Name:  
Street Address:
City, State, Zip:
Contact Name:
Email Address:
Fax Number:
Phone Number:
AUDUBON CONVEYOR BELT RECOMMENDATION FORM 
If you would like Audubon to recommend a belt best suited for your application, please fill in the form.  All information will be held strictly confidential.  Our enginneering department will be back to you with a recommendation and price quotation.  Audubon manufactures wire mesh conveyor belts only.  Our engineers do not design, nor are they in the position to recommend a complete conveyor system.   Please have all the information requested below readily available so we can make the proper recommendation for an Audubon Conveyor Belt.
AUDUBON Sales & Service
"Conveyor Belt Manufacturer Since 1884"
850 Pennsylvania Blvd.
Feasterville, PA  19053   
PH:  (800) 523-0169 (toll free in u.s.)
PH:  (215) 364-5451
FX:   (215) 364-5538

All fields below are required
Additional Comments:
If you prefer a certain 'style' metal mesh conveyor belt in the recommendation check below: otherwise Audubon will recommend the most econonomical  conveyor belt for your application:
Required Field: We must have minimum product size to determine the proper mesh opening to contain your smallest product size.
Type of Wire Mesh Conveyor Belt Drive:

Required Field.  Above applies only to friction or pressure roll drives. If this does not apply put N/A.
Please specify unit of measurement  (feet, inches, mm etc)
Required Field. If this is Not Applicable, please put N/A in field 
Is there an atmosphere in the furnace?
If yes please describe the belt and/or specification and also the problem you are having with your existing conveyor belt specification:. Put N/A if this is a new application
If Yes Advise details
Your Contact Information:
Required Field.  Above applies only to friction or pressure roll drives. If this does not apply put N/A
Required Field. If no temperature involved please put AMBIENT in this field.
Required Field above. If does not apply please put N/A.

Are you replacing an existing conveyor Belt?
Please specify unit of measurement  (feet, inches, mm etc)
Please specify unit of measurement  (feet, inches, mm etc)
Is this a New Application?
Please include your zip code or postal code.
Yes
No
Yes
No
Charge End
Discharge End
Please recommend
Friction
Pressure Roll
Chain
Roller
Hearth
Skid
Uniform
Concentration
Yes
No
Chain Weave Conveyor Belt, Positive Drive
Friction Drive Wire Mesh Conveyor Belt
Positive Drive Wire Mesh Belt with Segment Roll